DC Voltmeter Ammeter 0-100V 300V 600V Include Shunt 1000A 75mV Voltage Current Meter Volt Ampere Tester Amp Gauge Monitor(Black Cover,DC0-600V)

AmmetersDC 1000A Voltmeter Ammeter DC 0-100V 300V 600V Include Shunt 1000A 75mV Voltage Current Meter Volt Ampere Meter Current Tester1,999mA, 2A, 5A, 10A, 20A,the shunt is built in.2,More than 20A,you must use a shunt to work,even 0.1A, or it will be burnt.3,Because the 24V battery charge full of floating voltage may be more than 30V, so "no" recommended direct use 24V battery.4,In the following circumstances, it is strongly recommended to choose: isolation meter(isolated power supply meter):(1)When two or more meters are installed on a device. (2)Can not be isolated power supply.Supply voltage: DC3.5 ~ 30V(Note:The maximum input voltage can not exceed 30V, or be burnt.) <;20mADisplay mode: 0.39 "LED, Red for voltage,Green for currentDimensions: 70 × 40 × 30 mmInstallation opening: 68 × 38 mmMeasurement rate: 500mS / timeMeasurement accuracy: 1% (± 2 digits) The negative of power supply and the testing side areconnected.It need a independent power supply.It can't be allowed more than two meters use one power supply.The wide power supply range, with reverse polarity protection.Display voltage and current on thescreen at the same time.Use the SMT technology,so consistency is very good.With a back cover,safe ,reliable and dustproof.The decimal point automatically shifted.With a voltage calibration potentiometer, current calibration potentiometer, you can calibrate by yourself.The tolarance is absolutely exist.Good anti-interference ability, showing the refresh speed.With five wires,connection is convenient,used to monitor the battery voltage,can be also used for other products.This meter is equipped with five wires, please find professionals in strict accordance with the following connection diagram, if any questions please feel free to contact customer service.Meterpower supply: two-wire terminalsBlack wire: Negative power supply.Red wire: Positive power supply.Testing side:three-wire terminalsCOM: Test common terminal(TheCOMis commond negative of voltmeter and ammeter)V +: Test positive voltage inputA +: Test positivecurrent input.It can only be connectthe loadnegative and load power negative, as shown below.Suitable for "20A or less",no need a shunt:==========Hign-concerned Chemical : NoneDimensions : 70*40*30mmOperating Temperature : -10~+50 degreesSupply Voltage : DC0-100V/300V/600VAccuracy Class : 1%+/-2 digitsModel Number : YB4835VA-DCDisplay Type : Digital OnlyDIY Supplies : ELECTRICALTest voltage : DC0-100V/300V/600VTest current : DC0-1000AShunt : 1000A/75mVMounting hole : 68*38mmFeature : Five wiresDisplay mode : 0.39'' LED

• Ammeters